1. The non-woven fabric splitter is welded by thick steel plate to be firm and the point of view is balanced, which makes the machine stable under high-speed operation;

2. The complete machine of non-woven cloth slitting machine adopts chrome-plated steel tubes, each of which is treated by dynamic balance;

3. Use 3-inch air expansion to put the reel. The diameter of the large roll can be up to 600mm

4. Three-inch air expansion reel and magnetic powder tension control device are selected for winding. The operation is simple and the diameter of large winding can be up to 600mm. Nice and neat roll;

5. The cutter can use an industrial surgical blade or a plain knife (art knife blade) between 18[2] mm and 1600mm.

6. The spindle and cutter of the non-woven cloth slitting machine use the stepless speed change system, which can be used for concavo-convex speed adjustment and positive rotation switching control; Electronic speed control system, easy to use;

7. Equipped with double-face diamond grinding tool system; The blade can be sharpened without disassembly, so that the blade keeps sharp for a long time. Good cutting quality; And with vacuum loading, to keep the cloth and track clean;

8. Select imported fine ball screw and slide rail, push the cutting width in parallel, adjust the cutting speed of imported AC motor stepless and control the cutting speed, then reach high precision, the accuracy can be controlled within 0.1mm;

9. Equipped with high-precision rectifying equipment system, and further guaranteed cutting accuracy;

Active counting devices take notice.